Mercedes-Benz 3D Car Logo

- Jul 10, 2019-

Mercedes-Benz 3D car logo, as three-pointed star emblem, hanged on the door of the car 4s shop. it looks like simple but not easy to make. It needs a series of processes such as plastic vacuum coating and light to form step by step.

展会 (2)

In the production of Mercedes-Benz 3D car logo, the raw materials selected on the market are clear acrylic sheets. Because the material has a light transmittance of more than 92%, after the built-in LED light source, the entire Mercedes-Benz  3D car logo is illuminated at night,  the effect is very good. Another reason is that, the Mercedes-Benz logo requires three-dimensional 3D effect, in the production, it is necessary to vacuum forming, and the acrylic sheet is used to form the stereoscopic vehicle logo.


Large vacuum forming , generally using semi-automatic vacuum equipment. The Mercedes-Benz 3D car logo is produced by semi-automatic plastic forming machine. The basic principle is to pull the rolled acrylic sheet into the electric oven in the blister machine for heating. The general temperature is 230 degrees Celsius, heating for about 5 minutes, acrylic board get softened and pulled to the top of the Mercedes-Benz standard mold, the mold is moved up and vacuumed.The softened acrylic sheet is adsorbed to the surface of the mold, waiting for cooling, and the cooling water is sprayed on the surface of the formed sheet to make it harden. 


Acrylic sheets have excellent weather resistance, high surface hardness and surface gloss, and  high temperature resistance, which can last for three to five years. The surface is treated by vacuum electroplating , has high quality and environmental protection. The UV primer is imported from Germany to ensure that the coating layer is not cracked and does not peel off in the outdoor five years.